Data Logger Suite
July 20, 2019, 04:28:22 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Welcome on our forum!
 
   Home   Help Search Login Register  

Pages: [1]
  Print  
Author Topic: Files do not transfer completely to CNC machine  (Read 14924 times)
aprecision
Newbie
*

Karma: +0/-0
Posts: 1


View Profile
« on: January 20, 2010, 09:07:11 PM »

I'm having an issue with the trial version of DNC Precision.  When I send a file to the Haas CNC control, it is completely empty at the control.  I've tried adjusting the starting and ending character parameters in DNC Precision, but this didn't have any effect.  Other DNC software, such as Multi-DNC and MultiLink, work just fine.  Is there anything I'm missing?
Logged
Arthur Grasin
Tech. Support
Administrator
Hero Member
*****

Karma: +0/-0
Posts: 764



View Profile WWW
« Reply #1 on: April 06, 2012, 10:00:00 AM »

Please, try to receive from the machine first. If this will work properly, then program should send to the machine with same settings.
Logged
chaos
Newbie
*

Karma: +0/-0
Posts: 1


View Profile
« Reply #2 on: March 05, 2010, 01:59:13 AM »

I'm having the same issue. The DNC program will receive just fine, but when sending, part of the info is missing.  Cry
Logged
Arthur Grasin
Tech. Support
Administrator
Hero Member
*****

Karma: +0/-0
Posts: 764



View Profile WWW
« Reply #3 on: March 08, 2010, 10:35:47 AM »

Please, send your controller model name to our support team via email with the file that you can receive. It is possible you need to adjust your settings.
Logged
darrylsaladino
Guest
« Reply #4 on: July 23, 2013, 10:00:00 AM »

This is one of the most commonly asked questions. All we can say is that if your CNC supports the RS232 protocol, then yes it will. We even supply a list of predefined CNC templates to get you started for many popular machines. We do not support exotic proprietory protocols that are outside the scope of RS232, such as LSV2, Fidia etc.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines