Data Logger Suite
February 23, 2019, 04:13:37 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Welcome on our forum!
 
   Home   Help Search Login Register  
Pages: [1] 2 3 ... 10
 1 
 on: February 15, 2019, 07:36:18 AM 
Started by Haigda - Last post by Arthur Grasin
I would recommend to re-install the program. This is the most simple way.

In the installation wizard select:
1. Create configuration.
2. Select your PBX.
3. Enable the "Write to database" option and select "MS Access."
4. After installing adjust the connection settings with your PBX.

 2 
 on: February 15, 2019, 01:05:03 AM 
Started by Haigda - Last post by nmbates250
Arthur, I am having the same issue. In the emails (Tracking ID G39-A2U-LLQY). I have tried the Option 2 found in " How to Configure logging to database using the ODBC Database module". Gone thru sets multiple times and I still get the Error of "It seems that Advanced PBX Data Logger does not write data to database. Please verify it setting." This is a new install. I should be having this hard a time getting this program to work.

 3 
 on: February 11, 2019, 07:44:51 AM 
Started by Administrator - Last post by Administrator
Our Data Loggers have been updated. Added a possibility to send an internal program event to a selected configuration. More on [https://www.aggsoft.com/serial-data-logger/download.htm].

 4 
 on: January 29, 2019, 11:52:25 AM 
Started by Administrator - Last post by Administrator
Ann: MODBUS RTU,TCP,ASCII plugin 4.0.58 build 116 is available. We've added new power meters to our database by Arch Meter, Solec, Veris, Masibus, Finder. More on [https://www.aggsoft.com/serial-data-logger/plugins/].

 5 
 on: January 17, 2019, 04:57:23 PM 
Started by Administrator - Last post by Administrator
AGG Software has released an update for TCP COM Bridge, bringing it to version 1.6.9 build 117. The old version didn't update the keepalive settings until the program restart. You can find the update in the Download area [https://www.aggsoft.com/tcp-com/download.htm].

 6 
 on: January 14, 2019, 03:32:52 PM 
Started by Administrator - Last post by Administrator
The GPS Tracker Data Logger software has been updated to version 2.8.8 build 114.  This version fixes several minor bugs in the GPS Tracker Monitor program. The new version of the software you can download in the Download area [https://www.aggsoft.com/gps-tracker-data-logger/download.htm].

 7 
 on: January 09, 2019, 06:17:04 PM 
Started by japras - Last post by japras
Hi Arthur!

thanks very much. i finally found the solution and it was exactly as you said. i ended up trying all offsets between -1 and 8 and finally found out the correct address.

thank you very much sir! you are amazing

 8 
 on: January 09, 2019, 02:30:23 PM 
Started by japras - Last post by Arthur Grasin
Hello,

1. Address - it looks like offset. Please, try it.
2. Set Offset to -1. In this case, the program will calculate it automatically for sequential items.
3. Count - I think it should be "1".

Tutorial:
http://www.aggsoft.com/serial-data-logger/tutorials/modbus-polling-1.htm

 9 
 on: January 09, 2019, 02:05:59 PM 
Started by japras - Last post by japras
hello,

i am new to this software. what i want to do is take data from my PLC using modbus RTU and to put it into SQL database.

I will highly appreciate if someone has managed to do this, to tell me how you managed to do it.

i am currently upto the stage where i have successfully managed to do a data query.
the response is as expected:
#01#03#0C#42#9A#00#00#42#A0#00#00#42#A4#00#00#C7#2A
first part: 01 = slave ID
second part: 03 = function code
third part: 0C = number of registers to read
fourth part: 42 9A 00 00 = value of register that i want = 77 decimal
fifth part: 42 A0 00 00 = 80 decimal

Note: my data type is 32 bit single floating point, with big endian format

my question is, what is next for me to do?
- i tried to get these data to go into excel first but so far the data that is outputted to excel is gibberish
- I am guessing my issue is with the parsing stage? because i guess that is the part that converts the hex to a decimal number?


much appreciated.

 10 
 on: January 09, 2019, 01:55:57 PM 
Started by Administrator - Last post by Administrator
New version 5.5.6 build 109 of the Accurate Printer Monitor program has been released. Some minor bugs has been fixed in the remote client application and administrator's interface. More on [https://www.aggsoft.com/printer-monitor/download.htm].

Pages: [1] 2 3 ... 10
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines