Data Logger Suite
September 23, 2018, 07:59:05 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Welcome on our forum!
 
   Home   Help Search Login Register  

Pages: [1]
  Print  
Author Topic: CNC program transfer  (Read 5672 times)
dafrenchman
Jr. Member
**

Karma: +0/-0
Posts: 12


View Profile
« on: November 01, 2017, 03:39:01 AM »

Allo,

I thought maybe File request might be what I am looking for...

Let's I send a command such as:

%
PRG TEST.CNC
%

I would like the system to read this and it would tell the system to send
TEST.CNC back to the origin IP where the request was made.

Is this possible?

Thanks.



Logged
Arthur Grasin
Tech. Support
Administrator
Hero Member
*****

Karma: +0/-0
Posts: 760



View Profile WWW
« Reply #1 on: November 01, 2017, 07:44:37 AM »

Hello.

Yes, this is possible in our DNC Precission, but only in the paid version. This features has the "Server mode" name.
Logged
dafrenchman
Jr. Member
**

Karma: +0/-0
Posts: 12


View Profile
« Reply #2 on: November 01, 2017, 07:56:24 AM »

This can run on the same server as data loggers?
Logged
Arthur Grasin
Tech. Support
Administrator
Hero Member
*****

Karma: +0/-0
Posts: 760



View Profile WWW
« Reply #3 on: November 01, 2017, 08:16:07 AM »

Yes, of course. But a logger cannot use the same COM port, because DNC Precision will open and use a COM port all time.
Logged
dafrenchman
Jr. Member
**

Karma: +0/-0
Posts: 12


View Profile
« Reply #4 on: November 01, 2017, 07:33:10 PM »

How about using TCP-IP as opposed to Com ports?
Logged
Arthur Grasin
Tech. Support
Administrator
Hero Member
*****

Karma: +0/-0
Posts: 760



View Profile WWW
« Reply #5 on: November 02, 2017, 07:32:49 AM »

Sorry, but DNC Precision can work with COM ports only. You may use it together with our TCP-COM Bridge software.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines